Форум INPRO Computer
Техническая поддержка => Серверы => Тема начата: Tem от 11 Сентябрь 2009, 10:12:43
-
Сервер Inpro Archer INT (ZA 5585 1123) №26423/1
стоит CentOS 5.3
в логи начало сыпать:
Sep 11 08:19:05 host smartd[3528]: Device: /dev/hda, 2047 Currently unreadable (pending) sectors
Sep 11 08:19:05 host smartd[3528]: Device: /dev/hda, 2047 Offline uncorrectable sectors
Sep 11 08:49:05 host smartd[3528]: Device: /dev/hda, 2047 Currently unreadable (pending) sectors
Sep 11 08:49:05 host smartd[3528]: Device: /dev/hda, 2047 Offline uncorrectable sectors
Sep 11 09:19:05 host smartd[3528]: Device: /dev/hda, 2047 Currently unreadable (pending) sectors
Sep 11 09:19:05 host smartd[3528]: Device: /dev/hda, 2047 Offline uncorrectable sectors
Ет уже все ? Винт под замену ?
-
Добрый день
У Вас в сервере стоит два диска Seagate HDD 250GB SATA-II NS
Самый быстрый и простой способ проверить их работоспособность - воспользоваться диагностической утилитой SeaTools
http://www.seagate.com/www/en-us/support/downloads/seatools/
Есть возможность теста из-под windows, или создать загрузочный флоп или CD.
Если тест скажет - FAIL - диск можно отправить на замену и без пересылки всего сервера.
-
пришло время опять заняться етим серваком, до етого он стоял в резерве....поменял винт, переустановил систему, результ тот же:
Dec 26 06:30:46 access smartd[2830]: Device: /dev/sda, 2047 Offline uncorrectable sectors
Dec 26 07:00:46 access smartd[2830]: Device: /dev/sda, 2047 Currently unreadable (pending) sectors
Dec 26 07:00:46 access smartd[2830]: Device: /dev/sda, 2047 Offline uncorrectable sectors
Dec 26 07:30:47 access smartd[2830]: Device: /dev/sda, 2047 Currently unreadable (pending) sectors
Dec 26 07:30:47 access smartd[2830]: Device: /dev/sda, 2047 Offline uncorrectable sectors
Dec 26 08:00:46 access smartd[2830]: Device: /dev/sda, 2047 Currently unreadable (pending) sectors
Dec 26 08:00:46 access smartd[2830]: Device: /dev/sda, 2047 Offline uncorrectable sectors
Dec 26 08:30:46 access smartd[2830]: Device: /dev/sda, 2047 Currently unreadable (pending) sectors
Dec 26 08:30:46 access smartd[2830]: Device: /dev/sda, 2047 Offline uncorrectable sectors
Dec 26 09:00:46 access smartd[2830]: Device: /dev/sda, 2047 Currently unreadable (pending) sectors
Dec 26 09:00:46 access smartd[2830]: Device: /dev/sda, 2047 Offline uncorrectable sectors
Dec 26 09:30:47 access smartd[2830]: Device: /dev/sda, 2047 Currently unreadable (pending) sectors
Dec 26 09:30:47 access smartd[2830]: Device: /dev/sda, 2047 Offline uncorrectable sectors
Dec 26 10:00:46 access smartd[2830]: Device: /dev/sda, 2047 Currently unreadable (pending) sectors
Dec 26 10:00:46 access smartd[2830]: Device: /dev/sda, 2047 Offline uncorrectable sectors
---
проверял софтом с http://www.seagate.com/www/en-us/support/downloads/seatools/
и прочими тестилками - никаких ошибок не обнаружено.
-
Проверьте версию прошивки винчестера (написана сверху на крышке) не SN05 ?
Что говорит smartctl ?
-
на крышке SN05 и написано.
smartctl -a /dev/sda
smartctl version 5.38 [i686-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST3250310NS
Serial Number: 9SF15VH3
Firmware Version: SN06
User Capacity: 250 059 350 016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Mon Dec 28 16:37:17 2009 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 634) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 57) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103d) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 078 063 044 Pre-fail Always - 82479144
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 18
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 8630100916
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2651
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 18
184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Unknown_Attribute 0x0032 100 099 000 Old_age Always - 25
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 079 068 045 Old_age Always - 21 (Lifetime Min/Max 18/30)
194 Temperature_Celsius 0x0022 021 040 000 Old_age Always - 21 (0 18 0 0)
195 Hardware_ECC_Recovered 0x001a 057 039 000 Old_age Always - 82479144
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
-
В BIOSe включён режим IDE или AHCI ?
Уточните - что и на что Вы меняли ?
По второму HDD ошибки есть ?
-
AHCI .... до этого было IDE (на прошлой системе CentOs 5.3)....сейчас стоит CentOS 5.4 .
По второму пока глянуть не могу, винт отключен.
-
Вообщем так
Замените кабель SATA
Проверьте разъем питания к HDD (оно иногда может лопнуть пополам вдоль)
Если не помогает - HDD на замену.
-
кабели менял, тоже самое получаю.
Попробую поставить другой винт, не сигадовский
-
HDD на замену в гарантию